Have you tried everything to clean your hydraulic wheels and they are not clean? Then, we will show you some home remedies to clean your hydraulic wheels and make them very clean and shiny.
The hydraulic sun is very clean.
Les carreaux de ciment, Thanks to their crystal-clear and smooth properties, they are an excellent material for maintaining hygiene and cleanliness. With neutral soap and water, you can clean them and leave them spotless, no matter if they are white or very clear. It is very difficult for dirt, saltpetre or stains to accumulate.
The hydraulic trolley also has the advantage of not being a breeding ground for cactus colonies. Hydraulic soles with mats are as unhygienic as they can be, because the fabric material and the humidity are excellent for bacteria and viruses to reproduce, making their total cleaning very difficult. The hydraulic carriage can be disinfected in the vacuum and cleaned in depth at regular intervals, which will not be expensive.
Cleaning the hydraulic trolley is simple. Your family, especially if you have young children, will always be assured that they will not be constantly exposed to mites and other bactéries.
Preparation of the carriage
A good preparation of the hydraulic hose reel is essential to ensure its final maintenance and a high level of performance once the installation is completed. First of all, once all the coating has been installed, it is advisable to wash each hydraulic hose reel with a neutral liquid soap mixed with water. If the hydraulic solenoid is free of water residues, we recommend that you use our Torra cleaner cleaning product. It is important not to use abrasive liquids such as Javel's water, ammonia or salfuman water, or anything that could damage the appearance of the hydraulic carriage.
Once the liquid soap and water solution has been applied, it is very important to wait until the sun is completely dry to prevent the appearance of spots. After this step has been carried out, it would be wise to apply a pore sealing product, in particular we recommend our sealant “Torra sealer” which will prevent the appearance of damp spots and will also protect against possible spots due to accidental damage.
The work carried out during the installation of the hydraulic lines may lead to water evaporation, which may lead to the appearance of white calcareous deposits, also known as “efflorescence”. However, they can be easily removed by washing in water and neutral soap. You can also use our cleaner Torra floor cleaner pour un nettoyage plus efficace.
By following these simple steps, we will prepare the sun cover and protect it against humidity, scratches and daily wear and tear. Afterwards, it is sufficient to carry out a very simple maintenance every now and then, which will preserve all the properties of the hydraulic carriage. We recommend our product to you. Torra Maintenance to keep your hydraulic sol in perfect condition on a daily basis.
How to clean the ceramic carcasses ?
Cold water and vinaigre solution
Cold water and vinaigre are a combination that can be used to combat saltpetre. This is an ancient formula, used by our great masters. With this clever way to clean your carts, you will not only eliminate these unpleasant and indescribable stains, but your carts will also be clean and bright.
To clean the roads, prepare a solution with warm water and vinegar. Add a half-teasse of vinegar per litre of water. Vigorously rub the wheels with a hard brush and this solution.
After this deep cleaning, rinse the vadrouille as usual. You can add a little sun deodoriser in the water, or a product that has a very good smell, as the smell of the vapour may not be very pleasant. Once the sun is dry, you will see how well it is cleaned with this magic solution.
Bicarbonate of soude
Baking soda is ideal for removing stubborn stains from your car. It is excellent for eliminating strong odours such as those produced by our pets' waste and for removing the stains they leave on our carts.
The best way is to soak the bicarbonate of soda on the stain, add a little warm water, let it soak for a few minutes, then remove it with a cloth.
Please note that the hydraulic hoses must be properly waterproofed according to the manufacturer's instructions.
Once sealed, we will close the pore, so that if a stain appears, it will not penetrate into the carriage. If the tache has penetrated into the carriage, we must clean it with neutral soap and water, and only use chemical products when recommended by the manufacturer.
Nettoyer des carreaux or encaustic cement tiless can be a very difficult task, especially if we cannot cross the border of water and soap. Although this may seem strange, it is NEVER necessary to use chemical products to remove gravel or any other type of salt. What could happen would be to damage your hydraulic solenoid for good.
Products NEVER to be used on a hydraulic solenoid.
Cleaning of roads with chemical products
Chemical products are dangerous for hydraulic trucks. We recommend that you only use the chemical products recommended by the manufacturer, as you could permanently damage your hydraulic trolleys.
Hydraulic soles cleaning : Non recommended products
Ton meilleur ami, l'ammoniac
Far from the unpleasant smell and the risk of intoxication, ammonia is undoubtedly one of the best products for the correct cleaning of standard soles, but not hydraulic soles. It is one of the best degreasers available on the market, and its great advantage is that many brands offer this product for free sale. It is specialised for the kitchen.
My secret weapon, the chlorhydric acid
It is one of the most aggressive chemical products of all. Chlorohydric acid must be diluted with a certain amount of water, but it is not suitable for your hydraulic carriage as it could damage it. C'est pourquoi il est important de consulter le fabricant avant d'entreprendre toute action. De plus, vous devez prendre en compte qu'il est très toxique, donc vous devez faire attention à votre peau et à vos yeux.
Eau de Javel : Do not use with mosaic
Javel water, which contains sodium hypochlorite as an active ingredient, is one of the strongest products for road cleaning. In addition to its obvious cleaning effect, this product is ideal for disinfecting various communal areas and is the ultimate bleach for bathrooms and kitchens. The problem is that it is too aggressive, so some materials do not support it and can be damaged, as is the case with encaustic cement tiles.
3 natural ways to clean encaustic cement tiless
These three natural methods to keep your carts in shape will be a great help.
One of the best ways to disinfect and clean a mosaic tile is to use water, but precisely in the form of steam. Steam has great properties to remove some light stains thanks to its high temperature. You can use a casserole of warm water or a conventional steam cleaner.
We recommend waterproofing the encaustic cement tiles. In this way, we seal the pores and avoid scuffing. Once waterproofed, in the event of a stain, we will always use neutral and water-based soaps. In conclusion, we do not recommend the use of these chemical products for cleaning your hydraulic solenoid, unless the manufacturer deems it necessary.
Bicarbonate and magic
If the stain becomes very difficult to clean on the wheels, it is time to use new techniques. A toothpaste and bicarbonate of soda are one of the best ways to treat tenacious saltpetre. The best thing is that you don't need to protect yourself because it is not a particularly abrasive material.
Everything you need to know about vinegar
Citron vinegar has many cleaning properties, which makes it one of the best tools to keep your cars in very good condition. Diluted in a little water, it is undoubtedly the best natural element to keep your house in very good condition.
Cleaning carts is excellent, but with natural products, it is even better. Do not forget to use techniques that put chemical products at risk, which could endanger your life and that of your family.
We recommend waterproofing the encaustic cement tiles. In this way, we seal the pores and avoid scuffing. Once waterproofed, in the event of a stain, we will always use neutral and water-based soaps. In conclusion, we do not recommend the use of these chemical products for cleaning your hydraulic solenoid, unless the manufacturer deems it necessary.
Accessoires pour le nettoyage des sols hydrauliques
Hazardous chemicals for cement tile flooring
There are various accessories for cleaning carts and mosaics that have an impressive effect, but they are very difficult to find at home, for example. There are three products for cleaning mosquito nets which are excellent in their task, but their ease of finding them at home makes them ideal for emergency cleaning or for much quicker activities.
Éponge : produit polyvalent
The sponge is one of the best materials for cleaning almost all types of salt flats. Its soft side is perfect for making the surface of the carriage or mosaic shiny, as well as being a means of removing shallow scratches. Usually, it has a rough side which works very well when you have gravel or dirt, although this also depends on the cleaner or the substance you use to remove the stain.
Brightness with cotton chiffon
One of the best accessories for cleaning mosaiques is the cotton cloth. It may have the disadvantage that it is not very useful for wheel or gravel cleaning, but if your only objective is to give the maximum of cyclat to your mosaic, hydraulic trolley or cart, this is your great ally.
The easiest thing to find: a toothed bead
Il y a toujours une tache presque impossible à enlever avec divers ustensils, mais votre meilleur allié dans ce cas est une brosse à dents que vous n'utilisez plus. Il est résistant pour être utilisé avec n'importe quelle substance de nettoyage, en plus d'être parfait pour frotter cette tache si difficile de rouille ou de moisissure.
These three products for cleaning mosquito nets are excellent, easy to use and easy to find. Try them.
Advice on daily cleaning of hydraulic soles
First of all, before undertaking any daily cleaning routine, it is important to know that there are certain types of cleaning agents for soles, such as Javel water or aggressive chemical products, which are not suitable for use on the hydraulic carriage, as their components could damage its surface.
For daily cleaning, we recommend washing the sun with our Torra maintenance product, which will preserve it and give a natural radiance to your hydraulic wheels.
The daily cleaning of the hydraulic carrelage must be carried out only with water and neutral soap, a mixture sufficient to remove small surface spots, stains and residues due to the daily use of the sun by people.
In the case where the hydraulic carrelage is not blocked or does not require thorough cleaning in the absence of domestic taches or any reversal, it is sufficient to pass a sponge balai daily, which will allow easy and rapid removal of all traces of sponge.
Despite the fact that it is very visually appealing, it is easy to maintain its surface on a daily basis, without the need to use a specific product, and with the utmost simplicity. If you are looking for an unbeatable aesthetic finish and maximum ease of maintenance, the hydraulic trolley is the ideal choice for all types of parts.
Step 1: Avoid any kind of poussière
As you are constantly in contact with the environment, your hydraulic floor or mosaic wall will have traces of soda almost every day. As with any other material, you should start your cleaning routine by removing all traces of stain and debris, also avoiding the risk of the material being completely scratched.
You should use a balai or a vacuum cleaner. As far as the walls are concerned, you should pay close attention to the corners.
Step 2 : Use the appropriate detergent
As this is a general cleaning, you should choose a neutral detergent or a very mild cleaner to clean and preserve your hydraulic solenoid. We recommend here our product Torra maintenance for a daily use of your cleaning.
Step 1: Avoid any kind of poussière
As you are constantly in contact with the environment, your hydraulic floor or mosaic wall will have traces of soda almost every day. As with any other material, you should start your cleaning routine by removing all traces of stain and debris, also avoiding the risk of the material being completely scratched.
You should use a balai or a vacuum cleaner. As far as the walls are concerned, you should pay close attention to the corners.
Step 2 : Use the appropriate detergent
As this is a general cleaning, you should choose a neutral detergent or a very mild cleaner to clean and preserve your hydraulic solenoid. We recommend here our product Torra maintenance for a daily use of your cleaning.
One of the main problems that can appear on hydraulic soles or old roads is the so-called "wetting". The clogging is a mushroom that is embedded in any wet surface, and the worst thing is that, when it develops, it is practically impossible to remove. So that you don't get stressed when cleaning, here are a few tips:
With warm water, your neutral soap and a green sponge, remove all traces of moisture from the hydraulic carriage.
Savez-vous comment nettoyer les joints des carreaux ?
I have to warn you that this will be a very long and even painful process, but there is one thing you have to do if you want to see your sunroom or your walls in encaustic cement tiles tiles looking as good as they did on the first day. Voici ce qu'il faut faire :
Si la tache sur les joints n'est pas grave
If it is at least noticeable in the form of a brown or grey colour, the solution will be much easier than you think. After vacuuming and cleaning your encaustic cement tiles with a mild solution to ensure that there is no staining, you should obtain a white rubber. Why use a white rubber? Well, you must literally make the joints salty.
Even if you don't believe it, the salt builds up on the rubber, making your mosaic or hydraulic carriage shine spectacularly.
Si la tache ne part pas
The joints are often very salty because we never think that they will be visible. If the stain is very difficult to remove, you should create a cleaner with water and baking soda. Impregnate your carcasses and carrels with the paste, wait about 10 minutes and rub with an old toothpaste. Everything will gradually fade away.
If you really think that the stain is impossible to remove, before using the bicarbonate, rub the joints with a used cloth and Javel's water, in order to remove the remaining stain.
Find out more about hydraulic soles!
