Have you tried everything to clean up your cement tile flooring and they don't look good? Here are some home remedies to clean your tiles and make them sparkling clean and shiny.
The hydraulic floor is very clean
Mosaic tiles, thanks to their crystalline and smooth properties, are an excellent material for maintaining hygiene and cleanliness. With neutral soap and water, they can be cleaned and left spotless, regardless of whether they are white or very light. It is very difficult for dirt and stains to accumulate.
Hydraulic mosaic also has the advantage of not being home to colonies of bacteria. Carpeted tiled floors are about as unhygienic as it gets, as the fabric material and moisture are excellent for bacteria and viruses to breed, making it very difficult to clean completely. Hydraulic mosaic can be steam disinfected and thoroughly cleaned from time to time, which is not so expensive.
Cleaning cement tiles is easy. Your family, especially if you have small children, will always be sure that you are not living with dust mites and other bacteria all the time.
Preparation of the tile
A good preparation of the cement tile is fundamental to guarantee its later maintenance and a high level result once the installation is done. First of all, and once we have all the flooring installed, it is advisable to wash each of the cement tiles with neutral liquid soap mixed with water. If the hydraulic floor is dirty with residues from the work, we recommend that you use our cleaning product. Torra cleaner. It is important not to use any type of abrasive liquid such as bleach, ammonia or salfumán, and nothing that could deteriorate the appearance of the cement tile.
Once the liquid soap and water solution has been applied, it is very important to wait until the floor is completely dry to avoid the appearance of stains. After this step, it would be necessary to apply a special pore-covering product, we recommend our waterproofing product “Pore sealer".“Torra sealer”This will prevent stains caused by dampness and at the same time protect it from future stains caused by accidental spillages.
The work carried out when laying cement tiles can cause water to evaporate, leading to the appearance of calcification deposits with a whitish appearance, also known as “saltpetre”. However, they will disappear easily with the washing of neutral soap, you can also use our cleaning product. Torra floor cleaner for more effective cleaning.
By following these simple steps, we will prepare the floor and protect it against damp, stains and daily wear and tear. Afterwards, it will only be necessary to carry out a very simple maintenance periodically, which will preserve all the properties of the cement tile here we recommend our product el Torra Maintenance that will keep your hydraulic floor impeccable from day to day.
Cleaning cement tiles with chemicals
Chemicals are hazardous to the water floor. We recommend that the only chemicals you use are those recommended by the manufacturer, as you could ruin your hydraulic floor.
Cleaning of hydraulic floors: Unsuitable products
Your great friend Ammonia
Far from the bad smell and possible intoxication, ammonia is undoubtedly one of the best products for the correct cleaning of normal floors, but not of hydraulic floors. It is one of the best degreasers on the market, and its great advantage is that there are many brands that handle this product for free sale. It is a specialist for the kitchen
Your secret weapon called Salfuman
This is one of the most aggressive chemicals of all. Hydrochloric acid should be dissolved with a few parts of water, but it is not suitable for your cement tile as it can damage it. It is therefore important to consult the manufacturer before taking any action. Also, be aware that it is very toxic, so be careful with your skin and eyes.
Bleach: Do not use with Mosaic.
One of the strongest products for cleaning tiles is bleach, which has sodium hypochlorite as its active ingredient. In addition to its clear cleaning effect, this product is ideal for disinfecting various common areas and is the ultimate bleach for bathrooms and kitchens. The downside is that it is too aggressive, which means that some materials cannot withstand it and can be damaged, as is the case with encaustic cement tiles tiles.
3 natural ways to clean encaustic cement tiles tiles
These three natural ways to keep your mosaics clean will help.
Always rely on water
One of the best ways to disinfect and clean a mosaic is by using water, but precisely in the form of steam. Steam has great properties for removing some light stains thanks to its high temperature. You can use a pot of hot water or a conventional steam iron.
We recommend that the encaustic cement tiles be waterproofed. In this way we seal the pore and prevent staining. Once waterproofed, if it stains, we will always resort to the use of neutral soaps and water. In conclusion, we do not recommend the use of these chemical products to clean your tile floor, unless the manufacturer considers it appropriate.
Bicarbonate and magic
If the stain becomes very difficult to remove, it is clean tiles, If you're not sure what to do, it's time to use new techniques. A toothbrush and baking soda is one of the best ways to deal with heavy dirt. Best of all, you don't need to protect yourself, as it's not exactly abrasive.
Everything you need to know about vinegar
Apple cider vinegar has many cleaning properties, which makes it one of the best tools to keep your tiles in very good condition. Dissolved in a little water, it is undoubtedly the best natural element to keep your home in a very good condition.
Cleaning tiles is excellent but with natural products it is much better. Remember, using techniques where chemicals are the main actors can put you and your family's lives at risk.
We recommend that the encaustic cement tiles be waterproofed. In this way we seal the pore and prevent staining. Once waterproofed, if it stains, we will always resort to the use of neutral soaps and water. In conclusion, we do not recommend the use of these chemical products for cleaning your tile floor, unless the manufacturer considers it appropriate.
Accessories for hydraulic floor cleaning
There are various accessories for cleaning tiles and mosaics that have an impressive effect, but are very difficult to find in your home, for example. There are three tile cleaning products that are excellent at their task, but the ease of finding them in your home makes them perfect for emergency cleaning or for much quicker activities.
Sponge: product for 2 tasks
The sponge is one of the best materials for cleaning almost any type of dirt. Its soft side is perfect for leaving the surface of the tile or mosaic shiny, as well as being a way to remove shallow stains. It usually has a rough side that works very well when you have grease or mildew, although it also depends a lot on the cleaner or substance you use to remove the stain.
Shine with a cotton cloth
One of the best tools for cleaning mosaics is the cotton cloth. It may have the disadvantage that it is not very useful for rust or grease stains, but if your only objective is to get the maximum shine out of your mosaic, cement tile or tile, it is your great ally.
The easiest to find: A toothbrush
There is always a stain that is almost impossible to get out with various tools, but your best ally in this case is a toothbrush that you no longer use. It is resistant enough to be used with any cleaning substance, as well as being perfect for carving out that stubborn rust or mildew stain.
These three mosaic cleaning products are excellent, easy to use and readily available. Try them out
Daily hydraulic floor cleaning tips
First of all, before carrying out any daily cleaning routine, it is important to know that there are certain types of floor cleaners, such as bleach or aggressive chemicals, which are not suitable for use on encaustic cement tiles, as their components could end up damaging the surface.
For daily cleaning we recommend scrubbing the floor with our product Torra maintenance that will preserve and give a natural shine to your cement tiles.
The daily cleaning of the encaustic cement tiles should be done only with the use of water and neutral soap, a mixture sufficient to remove small surface stains, dust, and debris derived from the use of the floor by the people who use it daily.
If the hydraulic floor is not stained or does not require extensive cleaning because there are no domestic stains or spillages, a daily wipe with a dust mop will be sufficient to remove any dust easily and quickly.
Despite being a very visually attractive floor, it is striking how easy it is to carry out the daily maintenance of its surface, without the need to use any type of specific product, and with maximum simplicity. If you are looking for an unbeatable aesthetic finish and maximum ease of maintenance, the hydraulic floor is the ideal choice for all types of rooms.
Step 1: Avoid all dust
As it is always in contact with the environment, your cement tile floor or mosaic wall will have traces of dust almost every day. As with any other material, you should start your cleaning routine by removing all traces of dust and debris, also avoiding the risk of the material being completely scratched.
You will have to use a broom or a hoover. In the case of walls, you should be very careful in the corners.
Step 2: Use the right detergent
As it is a general cleaning, you should choose a neutral detergent or very mild cleaner in order to clean and preserve your hydraulic floor, here we recommend you our product Torra maintenance for the daily use of your cleaning.
Step 3: Avoid major stains
Mould and rust are the worst enemies for your tile or mosaic. They are stains that are almost impossible to remove, so it is best to avoid them. In bathrooms you should let the humidity out by mopping up excess water and opening the door to let the steam escape. In kitchens, it is enough to clean the dirt when preparing food.
Here is the cleansing routine for you.
One of the worst stains that can happen to old tile or tile floors is the annoying mould. Mould is a fungus that permeates any damp surface, and the worst thing is that, when it grows, it is practically impossible to remove. So that you don't have to stress about cleaning, here are a few tips for you
With lukewarm water and your neutral soap and a green scouring pad, remove all access of mould and mildew on the cement tile.
Do you know how to clean the joints of cement tiles?
I have to warn you that it will be a very long and even desperate process, but it is something you have to do if you want to see your tiled floor or encaustic cement tiles walls shining like the first day. Here's what you need to do
If the staining of the joints is not serious
IF there is hardly any noticeable brown or grey colour, the solution will be much easier than you thought. After vacuuming and cleaning your encaustic cement tiles with a mild solution, to make sure there is no dust, you need to get a white eraser. Why would you use a white eraser? Well, you will literally have to erase the dirt from the joints.
Believe it or not, the dirt stays on the rubber, making your mosaic or cement tile shine in a spectacular way.
If the stain does not come out
Joints are often very dirty because we never thought we would see them. If the stain is very difficult to remove, you will have to create a cleaner with water and baking soda. Soak your mosaics and tiles with the paste, wait about 10 minutes and scrub with an old toothbrush. Little by little it will gradually clear up.
If you really think it is impossible for the stain to come out, rub the joints with an old cloth and bleach before the baking soda, in order to disintegrate what is left.
Find out more about cleaning of cement tiles!
